ClusterCTRL Triple

ClusterCTRL Triple

ClusterCTRL Triple for three Raspberry Pi Compute Modules.
  • Controllerless - all three Compute Modules are USB Devices (USB Gadget Ethernet/Serial/etc).
  • Boot from Compute Module eMMC (if available) or as a USB devices with rpiboot (software selectable).
  • All models of Compute Module can be used.
  • Can be used with a Raspberry Pi Controller (or other Linux machine).
  • Multiple ClusterCTRL devices can be used on the same host.
ClusterCTRL Single

ClusterCTRL Triple

ClusterCTRL Single a low cost Raspberry Pi Compute Module carrier board.
  • Controllerless - the Compute Module shows as a USB Device (USB Gadget Ethernet/Serial/etc).
  • Boot from Compute Module eMMC (if available) or as a USB devices with rpiboot (software selectable).
  • All models of Compute Module can be used.
  • Can be used with a Raspberry Pi Controller (or other Linux machine).
  • Multiple ClusterCTRL devices can be used on the same host.
ClusterCTRL A+6

ClusterCTRL Triple

ClusterCTRL A+6 for six Raspberry Pi A+/3A+ where one is the controller.
  • Controller - The first Raspberry Pi A+/3A+ is the controller, other A+/3A+ communication via USB Gadget Ethernet/Serial/etc
  • Nodes boot from SD (if available) or as a USB devices with rpiboot (software selectable).
  • Additional USB port can be used for mass storage, USB Ethernet, etc.
ClusterCTRL pHAT

ClusterCTRL Triple

ClusterCTRL pHAT for two Raspberry Pi Zero [W].
  • Controllerless - The pHAT is controlled and powered via USB by default. This allows the ClusterCTRL pHAT to be used . The first Raspberry Pi A+/3A+ is the controller, other A+/3A+ communication via USB Gadget Ethernet/Serial/etc
  • Nodes boot from SD (if available) or as a USB devices with rpiboot (software selectable).
  • Additional USB port can be used for mass storage, USB Ethernet, etc.
  • Multiple ClusterCTRL devices can be used on the same host.